To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
The V-bar studs on these chains bite into ice to give you superior traction. Low-carbon steel twist links are great in deep snow. Cams let you quickly adjust the fit for simple installation. Includes chains for driver's and passenger's sides.
Features:
Specs:
Note: These chains are not intended to be put on commercial vehicles like plows, forklifts, or tow trucks.
V-Bar Icebreakers
The V-shaped studs (also known as icebreakers, spikes, or cleats) that are built into these twist-link tire chains bite into ice, providing superior grip for a safer ride on ice-covered roads.
Installation
1. Drape the chain over both tires of your dual-tire setup, making sure that the center chain is between the tires and that the V-bars are facing out. (You can also lay the chain out and then drive onto it.)
2. Drive forward about 1/4 of a tire revolution.
3. Fasten the ends of the chain together.
4. Use the cam tensioning devices to tighten. Do this by inserting the flat end of the included wrench into the slot on each cam and twisting it.
5. Drive forward a bit and tighten the chain as needed.
You can use rubber or chain adjusters (sold separately) to increase the tension on the chains for a tighter fit.
How to Choose Snow Chains for Your Vehicle
To choose the right snow chain, you must match your tire size. Those measurements can be found on the side of your tire, as shown below.
185/60-15
These chains fit the following tire sizes:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Adam: Hi everyone. Adam, etrailer.com. Today, we're going to be taking a look at the Titan chain, snow tyre chains. So this does have a V bar style link, which is going to be the more aggressive style of your snow tyre chains. This is going to wear down a little bit more than some of your square shaped links, but it is going to give you superior traction to all of those. It may be a little rougher ride, but this is definitely going to get you out of those snowy or icy situations.
So this is going to be a ladder-pattern style tyre chain. Also, it is going to be made of a low carbon steel construction. It's going to last a decently long time and resist against rust and corrosion. Whenever you have these on, it's probably going to be soft on the roads. So having a nice, solid metal is definitely going to help it wear away.So, these do come in a pack of two, which have a decently sturdy canvas bag.
So for your all wheel drive and four wheel drive applications, you can just grab two sets on etrailer.com and it's going to be the same exact installation process on all four of your tyres. So the first thing we're going to want to do is lay out our chains and make sure there's no kinks in our links. Also, something to note, we want to make sure that the V-Bar is going to be facing out away from our tyre, and the open end here is going to be facing out as well. Once all that's done, we can try to grab the middle of our chains and drape them over our tyre.We'll make sure we get it nice and even. So now that we're back here, we're going to take our spare links here and our hook.
We're going to find a chain. I want to do the second closest, and then we're going to go around front and complete the connection. So around front, we're going to take our metal portion here, put it through a link and bend it over like so, it connects it to our spare link here. Now we can take our cam tensioner tool, put it into place and rotate this around to get that desired tightness.We don't have to do all of them, but I am going to do two here. We do have about four on this kit.
That should be pretty tight. So these cams did do a pretty good job at getting these chains nice and tight. And I only use two of them. There's two more that I could tighten down if we needed to get a little bit tighter, but if you want that added security and comfort, you can go on etrailer.com and purchase some of these rubber tensioners. And all you really need to do is just have the hooks facing out away from your tyres and then go on a diamond or star-pattern just across from each other to get them installed. That's something that you would like to have with your tyre chains. They don't come with them, but, we do sell them here at etrailer.com. Well, everyone, thanks for tuning in and taking a look at Titan chain, snow tyre chains..
Very pleased.
Great service
Doesn't look like I'll be staying home in the snow and ice with these.
Quick service, thank you. The package is on the deck, haven't opened it yet , just trusting they're right.
Thanks again.
Worked very well
The chains arrived ahead of schedule. I can't wait to use them.
the link that holds the cam to hook them together broke first use
The product showed up on time and in good condition. I have yet to try them but they look great
good customer service and very good pro duct
Required for ice and snow in Colorado
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.